Posts Tagged ‘Create’

Rod Ends SupplyCurtain rods to create additional long-

Today you will learn how to create a curtain rod with extra long 3 / 4 "standard curtain rods or 2.5" and 4.5 "wide pocket rods Dauphine.

Sometimes an application window may require a curtain rod with a length greater than that which is offered as a matter of values ​​or even as a special order in stores. The base of 3 / 4 "curtain rod is available in a straight line 12 feet in length.

Simply connect the pieces back to the shorter and the work is done. However, this can be prohibitive, asno more than 8 feet must be sent by the engine. This will cost a minimum of only $ 125 for freight. In addition, packaging costs will be added from the stems require additional packaging to avoid wrinkling during shipment. It is not very profitable if the windows are different spread the cost associated with each stem The solution is simple and requires little work and some things to complete (the tape, saw, pliers, files). TheHere's a solution that uses more than a couple of times.

Purchase supplies

The base of 3 / 4 "standard curtain rod 2 ½ to 4 ½" wide panel with pockets auction can extend beyond the proposed size of 120 "to 156". First, buy the longest available in the bar and make sure to select the behavior of screening required. The return is the distance of the rod projects from the wall. Several projections are available in 3 / 4 "Drive: 1 ½", 2 ½ "3 ½ "and 5 ½". Of the two large flat ½ "and 4 ½" Dauphine rear projection should not be a problem because these bars include adjustable brackets for the return of the depth is defined as necessary. Secondly, after determining the stem is no longer available for the application, calculate how many more stem and requires the additional purchase another stick or tent several feet longer than the desired length. Extension curtain rod is another option for extensionslengths of 24 "each.

The project

In 3 / 4 "standard curtain rod

When all the supplies and the stems are ready, start by cutting the stem with an additional coping. After cutting 3 / 4 "bar may require to smooth the edges to help to slide the bar next door and tell your curtain fabric disadvantages. Forceps may be necessary to do a little 'more or less to accommodate the adjacent rod , then insert the piece cut from the mainrod length possible. This will improve the resistance of the mother and help prevent sagging. Before sliding the rod or valance curtain rod, put the stick into the ground, measure the exact length needed and secure the stem with tape so as not to put the telescope together when the curtain rod pocket. If the curtain rod can be shown, considering the use of white tape, available at most major retailers.

For the large pocket or bars Dauphiné

AlignThe back support at both ends of the brackets auction may be necessary to do a little 'more or less to accommodate the bar next door before sliding the bar or curtain valance rod, put the stick into the ground to measure the exact length required and fix the stem with tape so that no telescope together when the threads of the pocket curtain rod. Another option is to use several short sheet metal screws to hold the stems.

During installation, remember to useMore media center to support the rod more firmly and prevent curling. Make sure you have a wizard to hang the bar as it is very easy to bend a bar long and thin, especially with all the extra weight on it. Although this method is ideal for curtain rods, does not work for Rails / tents. The adhesive tape or screws can be found in the way, the slightest deviation from the mother to keep the door to slide properly.

Interior MallTent bars also available in different lengths.

Rod Ends Supply

Rod Ends SupplyCreate Extra long curtain rods

Today we learn how to create a curtain rod extra long 3 / 4 "standard curtain rods or 2.5" and 4.5 "wide rod pocket Dauphine.

Occasionally, an application window may require a curtain rod that is longer than what is offered as an inventory item, or even as a special order item in stores. 4.3 The basic curtain rod, "is available in a straight line, 12 feet in length.

Simply connect the pieces of performance extends to the end and the job is done. However, it can be prohibitively expensivejust over 8 feet long shall be sent by the engine. The cost is only $ 125 for freight. In addition, packaging costs will be added from the bars require additional packaging to prevent bending in transit. This is not very lucrative if multiple windows are involved in allocating the cost of the bar to the remedy is simple and requires little work to complete and some elements (belt, saw, pliers, file). L 'Here's a solution, I used more than a couple of times.

To purchase supplies

The base of 3 / 4 "standard curtain rod 2 ½ to 4 ½" wide pocket curtain rod can extend beyond the number of expected participants were 120 to 156. "First, the provision to buy more long stem that is selected, the projection of the required return. The return is the distance of the rod projects from the wall. Several projections are available in 3 / 4" Shank: 1 ½ ", 2 ½"3 ½ "5 ½". The staff of 2 ½ and 4 ½ "projection should be re-Dauphine should not be a problem because these bars include adjustable brackets to the depth set to return if necessary. Second, after determining the auction more available to calculating the length of the sum over the bar and buy an extra need another auction more than a foot or more of the desired length. An extension of the curtain rod is another option to extend thelengths of 24 "each.

The project

Rod standard 3.4 "

When all the supplies and the stems are ready, start by cutting the tip of the barrel with a hacksaw additional. After the cut of 4.3 bar, the presentation may be required to soften the edges to help stop the slide in the side and tell your problems curtain fabric. Clip may need to order a larger or smaller to accommodate the nearest bar and then insert the cut piece in the mainwith their length as much as possible. This will improve the strength of the barrel and help prevent sagging. Before you slide the bar on the curtain or valance, rod fixed to the ground, measure the exact length needed and ensure the bar with tape to not follow all the threads on the pocket curtain rod. If you can see the curtain rod, consider using white tape is available in most major retailers.

Mother-Dauphine width of pocket or

Addout the back on both ends of the clamp rod can take more than an order or to accommodate the slider along the bar before the bar of the curtain or valance, rod fixed to the floor to measure the exact length you need and go the shaft with the tape so it does not follow every thread in his pocket curtain rod. Another option is to use various sheet metal screws to hold together the stems cut off.

During installation, remember to useMore central supports to hold the bar securely in place longer and avoid bending. Make sure to get some help to hang the bar as it is very easy to bend a rod long and thin, especially with all that extra weight. Although this method is ideal for curtains, it does not work for bar / tent. The adhesive tape or screws on the road, the smallest deviation from the mother to keep the door to slide properly.

Interior MallIt also tends rods available in various lengths.

Rod Ends Supply