Posts Tagged ‘Create curtain’

Rod Ends SupplyCreate Extra long curtain rods

Today we learn how to create a curtain rod extra long 3 / 4 "standard curtain rods or 2.5" and 4.5 "wide rod pocket Dauphine.

Occasionally, an application window may require a curtain rod that is longer than what is offered as an inventory item, or even as a special order item in stores. 4.3 The basic curtain rod, "is available in a straight line, 12 feet in length.

Simply connect the pieces of performance extends to the end and the job is done. However, it can be prohibitively expensivejust over 8 feet long shall be sent by the engine. The cost is only $ 125 for freight. In addition, packaging costs will be added from the bars require additional packaging to prevent bending in transit. This is not very lucrative if multiple windows are involved in allocating the cost of the bar to the remedy is simple and requires little work to complete and some elements (belt, saw, pliers, file). L 'Here's a solution, I used more than a couple of times.

To purchase supplies

The base of 3 / 4 "standard curtain rod 2 ½ to 4 ½" wide pocket curtain rod can extend beyond the number of expected participants were 120 to 156. "First, the provision to buy more long stem that is selected, the projection of the required return. The return is the distance of the rod projects from the wall. Several projections are available in 3 / 4" Shank: 1 ½ ", 2 ½"3 ½ "5 ½". The staff of 2 ½ and 4 ½ "projection should be re-Dauphine should not be a problem because these bars include adjustable brackets to the depth set to return if necessary. Second, after determining the auction more available to calculating the length of the sum over the bar and buy an extra need another auction more than a foot or more of the desired length. An extension of the curtain rod is another option to extend thelengths of 24 "each.

The project

Rod standard 3.4 "

When all the supplies and the stems are ready, start by cutting the tip of the barrel with a hacksaw additional. After the cut of 4.3 bar, the presentation may be required to soften the edges to help stop the slide in the side and tell your problems curtain fabric. Clip may need to order a larger or smaller to accommodate the nearest bar and then insert the cut piece in the mainwith their length as much as possible. This will improve the strength of the barrel and help prevent sagging. Before you slide the bar on the curtain or valance, rod fixed to the ground, measure the exact length needed and ensure the bar with tape to not follow all the threads on the pocket curtain rod. If you can see the curtain rod, consider using white tape is available in most major retailers.

Mother-Dauphine width of pocket or

Addout the back on both ends of the clamp rod can take more than an order or to accommodate the slider along the bar before the bar of the curtain or valance, rod fixed to the floor to measure the exact length you need and go the shaft with the tape so it does not follow every thread in his pocket curtain rod. Another option is to use various sheet metal screws to hold together the stems cut off.

During installation, remember to useMore central supports to hold the bar securely in place longer and avoid bending. Make sure to get some help to hang the bar as it is very easy to bend a rod long and thin, especially with all that extra weight. Although this method is ideal for curtains, it does not work for bar / tent. The adhesive tape or screws on the road, the smallest deviation from the mother to keep the door to slide properly.

Interior MallIt also tends rods available in various lengths.

Rod Ends Supply